HP 8711C User Manual

I
-
Making Measurements
Using the BEGIN Key to Make Measurements
The User BEGIN Function (Option lC2 only)
The User 3EGIN softkey gives you the capability to redefine the [BEGIN] key
menu and install user-dellned macro functions. The User BEGIN key is only
available if your analyzer has IBASIC (Option lC2) installed. Use this key to
define macros such as:
l Softkeys to implement fast save/recall
l Softkeys to implement most used functions or features
l Softkeys to implement often-used features that involve a number of steps
Macros must be defined within an IBASIC program. If no User BEGIN
program is currently installed (either by AUTOST or Recall Program) the
analyzer will automatically create a default program.
User BEGIN c1n OFF selects the Ijj) key menu to “user” mode when
ON, and to normal operation when OFF.
Once you have changed the User BEGIN mode to ON, the same menu will
be displayed for subsequent key presses of the (BEGINI] hardkey. (This is not
true if your IBASIC program has changed. If the program has changed, the
User BEGIN mode is reset to OFF.)
Use of the User EEGIN function does not restrict access to any normally
available instrument feature such as marker functions, etc., nor does this key
affect sweep update rates.
Refer to example programs provided on the IBASIC programs disk for
implementation requirements. Keystroke recording may be used to modify or
update User BEGIN programs.
See Chapter 7, “Automating Measurements, ” for more information.
3-17
深圳市盛腾仪器仪表有限公司 Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.com

HP 8711C Specifications

General

Brand	HP
Model	8711C
Category	Measuring Instruments
Language	English