HP 8753E - Page 106

‘lhble l-11. HP-IB Only Commands (continued)
F
Action
Mnemonic S ? Description
iimit list
)UTPLIML
imit
marker
NJTPLIMM
darker
1UTPMARK
fiemory
RJTPMEMO
NJTPMEMF
tiarker
statistics
XJTPMSTA
3andwidth
XJTPMWID
3andwidth
+ loss
NJTPMWIL
lptions
‘lot
RITPOPTS
IUTPPLOT
‘ower mete1
:al.
NJl’PPMCAL< I>
C T
1
1
1
1
1
1
1
1
1
1
2
:continued)
Outputs the limit test results for each stimulus
point. The results consist of four numbers. The
first is the stimulus value tested, the second is
the test result:-1 for no test, 0 for fail, 1 for
pass. The third number is the upper limit value
and the fourth is the lower limit value. This is
an ASCII transfer (FORM 4).
Outputs the limit test results as described for
OUTPLIML for the active marker
Outputs the active marker values in 3 numbers
The first two numbers are the marker values,
and the last is the stimulus value. See ‘lkble l-1
for the marker values.
Outputs the memory trace from the active
channel. It is error corrected data in
real/imaginary pairs, and can be treated the
same as data from OUTPDATA.
Fast data transfer command for OUTPMEMO.
Outputs marker statistics: mean, standard
deviation, and peak to peak deviation. ASCII
format (FORM 4).
Outputs results of bandwidth search:bandwidth
center, and Q. ASCII format (FORM 4).
Same operation as OUTPMWID plus the loss
value.
Outputs an ASCII string of the options installed
Outputs the HP-GL plot string in ASCII format
to the HP-IB port. Can be directed to an HP-G1
plotter or printer.
Outputs power meter cal array for channel 1 oi
channel 2. Values are sent as 100 times the
power meter reading in dB.
HP-IB Programming and Command Reference Guide
l-99