These 4 commands set the gate shape:
GATSMAXI
MaXimtim.
GATSMINI
Minimum.
GATSNORM
Normal.
GATSWJDE
Wide.
GOSUB<I>
Invokes a sequence as a subroutine.
Range: 1 to 6.
These commands activate the harmonic measurement mode, Option 002.
They are all OPC-compatible:
HARMOFF
Turns OFF harmonic mode.
OPC-compatible.
HARMSEC
Measures the second harmonic.
OPC-compatible.
HARMTHIR
Measures the third harmonic.
OPC-compatible.
HOLD
Puts the sweep trigger into hold.
IDN?
Outputs the identification string:
HEWLETT
F’AC:KARD.
:37t#JEy
Uj X.
;::X,
where
87NNE
is the model number of
the instrument and X.Xx is the firmware
revision of the instrument.
1-118 HP-IB
Progmumi
ng and Command Reference Guide
To Next Page
Loading...
