HP 8753E - Page 135

MAR.KFVAL[D]
Sets the value of the fixed marker
position. Range: amplitude range.
MARKMAXI
MARKMIDD
MARKMINI
MARKOFF
MARKREF
MARKSPAN
MARKSTAB
MARKSTIM
MARKSTOP
MARKUNCO
MARKZERO
MAXF[D]
MEASA
MEASB
MEASR
Same as SEAMAX (search for maximum on
current channel’s trace).
During a limit segment edit, makes the
marker amplitude the limit segment
middle value.
Same as SEAMIN (search for minimum on
current channel’s trace).
Turns all markers and marker functions
OFF.
Sets the reference value to that of the
active marker’s amplitude.
Sets the span for the entire trace to that
of the span between the active marker
and the delta reference marker.
Sets the start stimulus to that of the
active marker’s.
During a limit segment edit, sets the limit
stimulus break point to that of the active
marker’s.
Sets the stop stimulus to that of the active
markers.
Uncouples the markers between channels,
as opposed to MARKCOUP.
Places the fixed marker at the active
marker position and makes it the delta
reference.
Sets the maximum valid frequency of a
standard being defined during a cal kit
modification. Range: 0 to 1000 GHX.
Measures and displays input A on the
active channel.
Measures and displays input B on the
active channel.
Measures and displays input R on the
active channel.
1-128 HP-IB Progr
amming and Command Reference Guide