MEASTAT<ONIOF’F>
MENU<ONIOFF>
Turns trace statistics ON and OFF.
Blanks the
softkey
menu. Use with
caution, as this may give unusual results
when setting up an instrument state.
Recommend setting up states using
MENUcON> (default) and, when setup is
complete, using MENU<OFF> .
These commands bring up the menu associated with the indicated
front-panel key:
MENUAVG
MENUCAL
MENUCOPY
MENUDISP
MENUFORM
MENUMARK
MENUMEAS
MENUMRKF
MENURECA
MENUSAVE
MENUSCAL
MENUSEQU
MENUSTIM
MENUSYST
MMPI
MINU
MINMAX<ONIOFF>
AVG
CAL
COPY
DISPLAY
FORMAT
MARKER
MEAS
MARKER FCTN
SAVE RECALL
SAVE RECALL
SCALE
SEQUENCE
STIMULUS MENU
SYSTEM
Sets the minimum valid frequency of a
standard being defined during a cal kit
modification. Range: 0 to 1000
Ghk.
Displays data minus memory, the same as
DISPDMM .
Enables/disables
min/max
recording
per segment. Min and max values are
recorded per limit segment. Limit testing
need not be active.
HP-IB
Programmi
ng and Command Reference Guide 1-129
To Next Page
Loading...
