PRNTRFORF
PrnP540
PRNTYPDJ
PRNTYPEP
PRNTYPLJ
PRNTYPPJ
PRNTYPTJ
PSOFT<ONIOFF>
PTEXT<ONIOFF>
PTOS
PURG<I>
Sends a form feed to the printer.
Selects the DeskJet 540 or
850C
printer
as the printer type.
Selects the DeskJet printer as the printer
type.
Selects the Epson ESUP2 printer control
language-compatible printer as the
printer type.
Selects the LaserJet printer as the
printer type.
Selects the
PaintJet
printer as the
printer type.
Selects the
ThinkJet
printer as the
printer type.
Controls whether
softkeys
are included
in the hardcopy print or plot.
Selects whether text is plotted.
Pauses the sequence; to be followed
by selection one of the 6 sequences
(SEQ<I>).
Purges the indicated file from disk.
Requires pass control mode when using
an external disk drive. Range: 1 to 5.
These 3 commands select the type of power meter calibration desired.
A calibration sweep should be taken (TAKCS) after selecting a “one
sweep” power meter calibration, to ensure a valid calibration. No
calibration sweep is needed for “each sweep” power meter calibrations.
Range: -100 to 100
dI3
PWMCEACS[D]
Each sweep.
PWMCOFF[D]
Off.
PWMCONES[D]
One sweep.
PWRLOSS<ONIOFF>
Selects whether or not to use the power
loss table for a power meter calibration.
HP-IB
Progr
amming and Command Reference Guide
l-143
To Next Page
Loading...
