PWRMCAL[D]
PWRR<PAUTOIPMAN>
&<I>
RAID
RAIISOL
EAIRESP
RAWOFFS<ONIOFF->
READDATE
READTIME
REAL
RECA<I>
RECAR.EG<I>
Displays the power meter cal menu and
sets the drive port cal power.
Range:
-100
to 100
dB
Select whether the power range is in auto
or manual mode.
Same as SEQ<I>. Range: 1 to 6.
Completes the response and isolation cal
sequence. OPC-compatible.
Calls the isolation class for the response
and isolation calibration.
Calls the response class for the response
and isolation calibration.
Selects whether sampler and attenuator
offsets are ON or OFF By selecting
raw offsets OFF, a full two port error
correction can be performed without
including the effects of the offsets. It
also saves substantial time at recalls
and during frequency changes (see
SMS<ONJOFF>).
Raw offsets follow the
channel coupling.
RAWOFFS< ON
1
OFF>
and
SAMC<ONIOFF>
are linked: when
one changes state, so does the other. See
BASIC programming Example
2E:
Take4
-
Error Correction Processed on an External
Computer.
Outputs the date in the following string
format: DD MMM YYYY. HP-IB only
command.
Outputs the time in the following string
format: HH:MM:SS. HP-IB only command.
Selects the real display format.
Recalls the indicated internal register.
OPC-compatible. Range: 1 to 5.
Recalls save/recall registers 01 through
31.
RECAREGOl
through
RECAREG05
1-144 HP-IB
Progr
amming and Command Reference Guide
To Next Page
Loading...
