Operation Model
8901B
PROCEDURES
Entering Special Functions
To use a special function, key in the corresponding code, then select
SPCL.
Special Display
To display the user-requested modes of special functions prefixed
1
through
10,
select
SPCL
alone one
time. The digit position (noted beneath the display) corresponds
to
the special function prefix, and
the number displayed in that position corresponds
to
the special function suffix.
Special Special Display
To determine the actual instrument settings corresponding
to
special functions prefixed
1
through
10,
press the
SPCL
key alone once while the Special Display
is
active.
(If
the Special Display
is
not active,
press the
SPCL
key twice
to
get this display.) The
digit
position corresponds
to
the special function
prefix, and the number displayed in
that
digit corresponds
to
the special function suffix.
HP-IB PROGRAM CODES
All
special function codes are formed by the special function number followed
by
the code
“SP”.
For
example, the code for Special hction
7.3
is
“7.3SP”.
For
special function codes with zero
as
a
suffix,
force a single space if the zero
is
to
be omitted.
For
example,
“1O.OSP”
could be
“10. SP”
EXAMPLES
Entering Special Functions
To display the frequency
of
the signal in the
IF’
(Special Function
34):
LOCAL
(keystrokes)
(program
codes)
34.0
SP
Code
Function
3-238
Special Fbnctions
To Next Page
Loading...
