Installation Model 8901B
IWARN'NOI
This
is
a Safety
Class
I
product (that
is,
provided with a protective earth
terminal).
An
uninterruptible safety earth ground
must
be provided from
the
main power source to
the
product input wiring terminal-s, power cord,
or
supplied power cord set. Whenever
it
is
likely
that
the protection has been
impaired,
the
product
must
be made inoperative and be secured against
any unintended operation.
If
this
instrument
is
to be energized via an external autotransformer, make
sure
the
autotransformer's common terminal
is
connected to the earthed
pole of
the
power source.
Power
Cables
IWARN'NGI
BEFORE CONNECTING THIS INSTRUMENT,
the
protective earth
terminals
of
this instrument
must
be connected to
the
protective conductor
of the (Mains) power cord. The Mains plug
shall
only be inserted
in
a socket
outlet provided with
a
protective earth contact.
The
protective action
must
not be negated
by
the
use of an extension cord (power cable) without a
protective conductor (grounding).
This instrument is equipped with a three-wire power cable. When connected
to
an
appropriate ac
power receptacle, this cable
grounds
the instrument cabinet. The type
of
power cable plug shipped with
each instrument depends on the country
of
destination. Refer
to
Table
2-1
for the part numbers of the
power cables available.
2-2
To Next Page
Loading...
