3 FIP-200 Wait N/A
2
4 RPE-X1 Normal Slave 0
5 RPE-X1 Normal Master 0
6 N/A Absent N/A
N/A
7 N/A Absent N/A
N/A
8 FIP-200 Startup N/A
2
9 FIP-200 Startup N/A 2
Solution
Contact your local sales agent.
Troubleshooting the Power System
Symptom 1
Symptom
The router cannot be powered on. The power LED on the front panel is off.
Solution
Check that:
The power switch of the router is turned on.
The power cord is properly and firmly connected.
The power source of the router is turned on.
The power cord is not damaged.
If the cause cannot be located in the steps above and the problem persists, contact your local
sales agent.
Symptom 2
Symptom
The router cannot be powered on. The power LED on the front panel is red.
Solution
Check that:
The power module is firmly in place.
The power source meets the requirement of the router.
If the cause cannot be located in the steps above and the problem persists, contact your local
sales agent.
Troubleshooting Fans
Symptom 1
Symptom
After the router is booted, the following information appears:
%Jul 5 14:47:20:618 2007 HP DEV/4/FAN ABSENT:
To Next Page
Loading...
Need help?
General
