HP A6616 User Manual

Figure 4-24
Insert a FIP
Step4
Fasten the captive screws on the FIP clockwise with a Philips screwdriver.
Figure 4-25
Fasten the captive screws
Step5
Turn on the power switch of the router if the router is powered off.
Step6
After the FIP is powered on, the RUN LED (green) flashes once and then flashes fast (at 8 Hz).
It flashes slowly (at 1 Hz) after the application is loaded. This means that the FIP runs normally.
Insert a FIP
Fasten the captive screws on the FIP clockwise with a Philips screwdriver.
Fasten the captive screws
Turn on the power switch of the router if the router is powered off.
After the FIP is powered on, the RUN LED (green) flashes once and then flashes fast (at 8 Hz).
It flashes slowly (at 1 Hz) after the application is loaded. This means that the FIP runs normally.
After the FIP is powered on, the RUN LED (green) flashes once and then flashes fast (at 8 Hz).
It flashes slowly (at 1 Hz) after the application is loaded. This means that the FIP runs normally.

HP A6616 Specifications

General

Brand	HP
Model	A6616
Category	Network Router
Language	English