HP c8000 - Page 80

4–10 Technical Reference Guide
Troubleshooting
Processor Faults
CPU0 temperature
exceeds limit.
If the processor fan has
failed, you must replace
the CPU.
CPU1 temperature
exceeds limit.
No processor detected. Replace the CPU(s).
BMC Faults
BMC firmware is
damaged.
Reflash the BMC
firmware.
System board FRU
inventory device
inaccessible.
Replace the system
board.
Temperature Faults
External air temperature
too high.
Make sure nothing is
blocking the system’s
airflow and locate your
system in an
air-conditioned room.
LED1 LED2 LED3 LED4 Fault Solution