Specifications
General Characteristics
HP EPM-441A/442A Service Guide 1-13
General Characteristics
Rear Panel Connectors
Recorder Output
Analog 0-1 Volt, 1 k
Ω output impedance, BNC connector
HP-IB
Allows communication with an external controller.
Ground
Binding post, accepts 4 mm plug or bare-wire connection
Line Power
• Input Voltage Range: 85 to 264 Vac, automatic selection
• Input Frequency Range: 47 to 63 Hz
• Power Requirement: approximately 50 VA (14 Watts)
4402serv.book Page 13 Monday, March 11, 2002 11:34 AM
To Next Page
Loading...
