Access panel
1. Prepare the computer for disassembly (Preparation for disassembly on page 20).
2. Slide the access panel release lever to the left (1) so that it locks into place. Then slide the access panel
back (2) and lift it o the computer (3).
To install the access panel, reverse the removal procedure.
Front bezel
1. Prepare the computer for disassembly (Preparation for disassembly on page 20).
2. Remove the access panel (Access panel on page 21).
3. Lift up the three tabs on the top of the bezel (1), and then rotate the bezel o the chassis (2).
To install the front bezel, reverse the removal procedure.
Access panel 21
To Next Page
Loading...
