6. If desired, you may use a wire tie (not provided) through the power cable retention loop to secure the
power cord.
If your computer model is a ProOne 400, you may further secure the plug by pressing it into the slot
below the power connector until it is locked into place.
Connecting a display
The DisplayPort connector on the rear of the computer allows you to connect a display to the computer.
If you are adding a display that has a DisplayPort connector, then no DisplayPort video adapter is required. If
you are adding a display that does not have a DisplayPort connector, you can purchase a DisplayPort video
adaptor from HP for your configuration.
DisplayPort adapters and video cables are purchased separately. HP offers the following adapters:
●
DisplayPort to VGA adapter
●
DisplayPort to DVI adapter
●
DisplayPort to HDMI adapter
To connect a display:
Connecting and disconnecting cables 25
To Next Page
Loading...
