Connecting and disconnecting power
Connecting power
1. If you have an EliteOne 800, EliteOne 705, or ProOne 600, plug the AC power plug into a AC outlet.
2. If you have a ProOne 400:
a. Connect the female end of the power cord to the power adapter (1).
b. Plug the AC power plug into a AC outlet (2).
3. Press the power button on the side of the computer to turn it on.
Disconnecting power
1. Remove all removable media, such as optical discs or USB flash drives, from the computer.
2. Turn off the computer properly through the operating system, then turn off any external devices.
3. Disconnect the AC power cord from the AC outlet and disconnect any external devices.
Connecting and disconnecting power 33
To Next Page
Loading...
