HP f969x - 2.6 LED Indicator and Power Control

15
2.6 LED Indicator
Status Explanation LED Indicator Color
Power on, standby Solid Green Light
Recording/ Recording
and screen off
Flash Red Light
2.7 Powering the Camcorder On / Off
2.7.1 Auto Power On/Off
Start the car engine, wait a few seconds to charge the camcorder, and
then screen will light up and the camcorder will automatically power on
and start recording.
Once the vehicle engine shuts down, the camcorder automatically saves
the recording and turns off the power.
Note: The camcorder is built-in with super capacitor. When start the engine, please wait a few
seconds to charge the camcorder, and then it will auto power on and start recording.
2.7.2 Manual Power On
To manually turn on the power, press the POWER button.
2.7.3 Reset
Press and hold the Power button for 3 seconds to reset the device.