21
3.5 Driving Safety
Note:
1. The
Driving Safety
function is limited to triggering no more than two alarms at the same time. If a
voice and alert message have been triggered, any other alarm will be ignored until either of the two is
settled.
2. Satellite positioning must be completed before functions such as
Speed Cam Alert
,
Speed Limit
Alert
,
LDWS
and
FCWS
to be enabled. Be sure to check that Satellite positioning has been completed
prior to using the product.
3. The detections of
LDWS
and
FCWS
may be inaccurate when used in rain, at night or in environments
of insufficient lighting. Drivers are advised to exercise discretion based on actual road conditions.
3.5.1 Speed Cam Alert
If the Speed Cam Alert function is enabled, once your car’s location is
determined by GPS and approaches a speed cam, this product produces
audible alert and screen message.
To enable the Speed Cam Alert, do the following:
1. Tap icon to enter the OSD menu
and choose Setting.
2. Tap / icon to select Speed
Cam Alert, and tap the right frame to
turn it on.
3. Tap the
<
icon twice to return
recording screen.
4. The alarm screen turns red to remind you to slow down if you are
driving faster than the speed limit.
Note:
The speed cam alert function must have the speed cam datum from the country you use. The function
will be void if the product is used in any other countries. Please consult with the shop you purchased if
the function is void. There is no guarantee the speed cam datum will be included for the worldwide
countries.
The following driving safety function is for reference only. Drivers are advised
to exercise discretion based on actual road conditions.
To Next Page
Loading...
