20
3.3 Emergency Recording
To Start the Emergency Recording, do the following:
1. During Video Recording, tap the
icon to enter emergency
recording mode, the Recording
Duration on the upper left corner of
the screen will turn to yellow from
red, and the recorded file will be
protected.
2. The emergency video recording length is same as the recording
interval setting. When the emergency recording length reaches the
setting, the system will return to the general recording mode.
Note:
1. If the Collision Detection function is enabled and a collision is detected, the camcorder will
automatically trigger the emergency recording.
2. The emergency file is created as a new file and saved in Emergency folder, which will be protected
to avoid being overwritten by normal loop recording. The Emergency folder will occupy 20% of
available memory card capacity. When the Emergency folder is full, the oldest emergency file will be
automatically deleted by the newest emergency file.
3.4 Picture in Video
You can also use this camcorder to take snapshots of the current scene.
1. In recording status, tap icon to
capture recording screen shots.
2. When the icon shows in the
central of screen, it means the
screenshots is completed.
Note:
1. The screen shots image resolution quality is depending on the video resolution setting.
2. The picture resolution is limited by the speed of the target object and changes in ambient lighting.
The photograph function is better used for taking still pictures in accident scenes or when the car is
stopped to wait for a traffic light.
To Next Page
Loading...
