25
3.6 Parking Mode
To monitor the vehicle when it is parked, you can activate Park Recording,
or Collision Detection, or Timelapse.
Before you activate Parking Mode, please install ACC cable through
professional car service shop.
Follow the steps below to change the settings for Parking Mode:
1. Tap icon to enter the OSD menu and choose Parking Mode.
2. Choose one of three types, and tap the right frame to turn it on.
- Park Recording: The camcorder will turn off the screen
temporarily, but still in recording status. The recorded files will be
saved in “Normal” folder. Once the collision or vibration is
detected, it will automatically trigger emergency recording, and
the file will be saved in “Event” folder. The recorded file is
according to Record Interval setting.
- Timelapse: The camcorder will turn off the screen temporarily,
but still in 1fps timelapse recoding mode. The recorded files will
be saved in “Normal” folder. When the camcorder detects any
vibration/collision, it will automatically trigger emergency
recording and the file will be saved in “Event” folder. The
recorded file is according to Record Interval setting.
- Collision Detection: The camcorder will turn off the screen
temporarily, but still in standby detection status. When the
camcorder detects any vibration/collision, it will automatically
trigger emergency recording and record the event for 30 seconds.
The file will be saved in “Event” folder. The recorded file is 30
seconds per file.
3. Tap the
<
icon to return recording screen.
4. When the setting is finished, disconnect ACC, the camcorder will
enter Parking Mode automatically. When the ACC is once again
connected, Parking Mode will be automatically disable and resume
to normal recording.
Note: ACC cable is not included in the package. Please ask for more information from your
distributor.
To Next Page
Loading...
