23
3.5.4 LDWS
Once your car’s location is determined by GPS and the LDWS function is
enabled, this camcorder produces audible alert and screen message
when you drive off of or change lanes at speeds over 70 km/h (43 mph).
To set the LDWS (Lane Departure Warning Systems), do the following:
1. Tap icon to enter the OSD menu and choose Setting.
2. Tap / icon to select LDWS, and tap the right frame to turn
it on.
3. Tap the
<
icon twice to return recording screen.
4. After enabling LDWS, the screen will display traffic lane align icon
, please adjust the camcorder so that the horizontal line and
the eye level are overlapped and the slash lines are centered in the
driving lane.
5. This product produces audible alert and screen message when
LDWS is activates.
Note:
1. Please measure front windshield viewing area, do not block the driver's forward field of vision, and
install the camcorder below rearview mirror (upper central of the front windshield). We recommend
that the sky and the ground occupied 50 % of the video screen, install the bracket then adjust the
camcorder to make the lane is aligned to the lane alignment icon. Correct installation makes the
camcorder to maximize the efficiency and improve the accuracy of LDWS.
2. Make sure that traffic lane align icon will not be obscured other things (e.g. hood). It may cause
misjudgment if the endpoint is obscured.
To Next Page
Loading...
