5 Specications
Input power
The power information in this section may be helpful if you plan to travel internationally with the docking
station.
The docking station operates on DC power, which can be supplied by an AC or a DC power source. The AC
power source must be rated at 100–240 V, 50–60 Hz. Although the docking station can be powered from a
standalone DC power source, it should be powered only with an AC adapter or a DC power source supplied and
approved by HP for use with this docking station.
The docking station can operate on DC power within the following specications.
Table 5-1 DC power specications
Input Power Rating
Operating voltage and current 19.5 V dc @ 6.15 A – 120 W
NOTE: This product is designed for IT power systems in Norway with phase-to-phase voltage not exceeding
240 V rms.
NOTE: The docking station operating voltage and current can be found on the docking station’s regulatory
label.
Operating environment
Table
5-2 Operating environment specications
Factor Metric U.S.
Temperature
Operating 0°C to 35°C 32°F to 95°F
Nonoperating -40°C to 70°C -40°F to 158°F
Relative humidity (noncondensing)
Operating 5% to 95% 5% to 95%
Nonoperating 5% to 90% 5% to 90%
Maximum altitude (unpressurized)
Operating -15 m to 3,048 m -50 ft to 10,000 ft
Nonoperating -15 m to 9,144 m -50 ft to 30,000 ft
Input power 21
To Next Page
Loading...
Need help?
General
