HP HP-UX 11i v3 - Page 109

On the server side, complete the following steps:
1. Create link aggregate lan901.
2. Create failover group lan902.
3. Create VLANs 333 and 334 over lan902. Enter:
# nwmgr -a -S vlan -A vlanid=333, ppa=902
VLAN interface lan5000 successfully configured.
lan5000 current values:
VPPA = 5000
Related PPA = 902
VLAN ID = 333
VLAN Name = UNNAMED
Priority = 0
Priority Override Level = CONF_PRI
ToS = 0
ToS Override Level = IP_HEADER
# nwmgr -a -S vlan -A vlanid=334, ppa=902
VLAN interface lan5001 successfully configured.
lan5001 current values:
VPPA = 5001
Related PPA = 902
VLAN ID = 334
VLAN Name = UNNAMED
Priority = 0
Priority Override Level = CONF_PRI
ToS = 0
ToS Override Level = IP_HEADER
Configuring VLANs over failover groups 109