Lights-Out DOS Utility 251
Command Line Argument Description
/HELP or /? Displays simple help messages
/DETECT Detects the iLO management processor on the target server
/RESET Resets the iLO management processor
/VIRT_FLOPPY Ignores the virtual floppy inserted error
/MIN_FW-xxx Enables you to set the minimum firmware version on which
the iLO management processor runs
/GET_STATUS Returns the status of the iLO management processor
/GET_HOSTINFO Retrieves and displays the current host server information on
the iLO management processor and displays the server
name and number
/GET_USERINFO Obtains the current users stored in the iLO management
processor board and displays the names, login names, and
security mask information
/GET_NICCONFIG Retrieves and displays the NIC settings stored in the iLO
management processor
/GET_DHCPCONFIG Retrieves and displays the DHCP settings stored in the iLO
management processor
/GET_DIRCONFIG Retrieves and displays the DIRECTORY settings in the iLO
management processo
/WRITE_XML=path\file
name.ext
Reads the settings on the iLO management processor and
writes the NIC, DHCP, DIRECTORY, and user settings into
an XML hardware configuration script file
/LOAD_XML=path\file name.ext Loads the script file and applies its changes to the current
configuration on the iLO management processor
/VERIFY_XML Verifies the accuracy of the script file and generates an error
message for any incorrect data
To Next Page