HP Integrated Lights-Out

288 User Guide Integrated Lights-Out
User does not have correct privilege for action. CONFIG_ILO_PRIV required.
GET_NETWORK_SETTINGS
The GET_NETWORK_SETTINGS command requests the respective iLO
network settings. For this command to parse correctly, the command must appear
within a RIB_INFO command block, and RIB_INFO MODE can be set to read
or write.
Example:
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="adminname" PASSWORD="password">
<RIB_INFO MODE="read">
<GET_NETWORK_SETTINGS/>
</RIB_INFO>
</LOGIN>
</RIBCL>
GET_NETWORK_SETTINGS Parameters
None
GET_NETWORK_SETTINGS Runtime Errors
None
GET_NETWORK_SETTINGS Return Messages
A possible GET_NETWORK_SETTINGS return message is:
<GET_NETWORK_SETTINGS
<SPEED_AUTOSELECT VALUE="Y"/>
<NIC_SPEED VALUE="100"/>
<FULL_DUPLEX VALUE="N"/>
<DHCP_ENABLE VALUE="Y"/>
<DHCP_GATEWAY VALUE="Y"/>
<DHCP_DNS_SERVER VALUE="Y"/>
<DHCP_STATIC_ROUTE VALUE="Y"/>