HP Integrated Lights-Out

316 User Guide Integrated Lights-Out
Example:
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="adminname" PASSWORD="password">
<RACK_INFO MODE="read">
<GET_TOPOLOGY/>
</RACK_INFO>
</LOGIN>
</RIBCL>
GET_TOPOLOGY Parameters
None
GET_TOPOLOGY Return Message
An example of a successful request follows:
<RK_TPLGY CNT="3">
<RUID>xxxxxx</RUID>
<ICMB ADDR="0xAA55" MFG="232" PROD_ID="NNN" SER="123"
NAME="Power_1">
<LEFT/>
<RIGHT ADDR="0xAB66" SER="123" NAME="Server_1"/>
</ICMB>
<ICMB ADDR="0xAB66" MFG="232" PROD_ID="NNN" SER="456"
NAME="Server_1">
<LEFT ADDR="0xAA55" SER="123" NAME="Power_1"/>
<RIGHT ADDR="0xAC77" SER="123" NAME="Power_2"/>
</ICMB>
<ICMB ADDR="0xAC77" MFG="232" PROD_ID="NNN" SER="789"
NAME="Power_2">
<RIGHT/>
</ICMB>
</RK_TPLGY>
SERVER_INFO
The SERVER_INFO command can only appear within a LOGIN command
block. Only commands that are SERVER_INFO type commands are valid inside
the SERVER_INFO command block.