HP Integrated Lights-Out

284 User Guide Integrated Lights-Out
GET_ALL_USERS
The GET_ALL_USERS command will return all USER_LOGIN parameters in
the user database. For this command to parse correctly, the command must
appear within a USER_INFO command block, and USER_INFO MODE can be
in read or write. The user must have the administrative privilege to retrieve all
user accounts.
Example:
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="adminname" PASSWORD="password">
<USER_INFO MODE="read">
<GET_ALL_USERS />
</USER_INFO>
</LOGIN>
</RIBCL>
GET_ALL_USERS Parameters
None
GET_ALL_USERS Runtime Error
The possible GET_ALL_USERS error messages include:
User does not have correct privilege for action. ADMIN_PRIV required.
GET_ALL_USERS Return Messages
A possible GET_ALL_USERS return message is:
<RESPONSE
STATUS="0x0000"
MESSAGE='No Error'
/>
<GET_ALL_USERS>
<USER_LOGIN VALUE="username"/>
<USER_LOGIN VALUE="user2"/>
<USER_LOGIN VALUE="user3"/>