Remote Insight Command Language 297
NOTE: If port changes are detected, the iLO management processor
will be rebooted to apply the changes after the script has completed
successfully.
MIN_PASSWORD command specifies how many characters are required in all
user passwords. The value can be from zero to 39 characters.
REMOTE_KEYBOARD_MODEL determines the remote keyboard language
translation used during remote console operation. The possible values are:
US Belgian British
Danish Finnish French
French Canadian German Italian
Japanese Latin American Portuguese
Spanish Swedish Swiss French
Swiss German
SSH_PORT specifies the port used for SSH connection on iLO. The processor
must be reset if this value is changed.
SSH_STATUS determines if SSH is enabled. The valid value are Yes or No,
which enables or disables SSH functionality.
SERIAL_CLI_STATUS specifies the status of the CLI. The possible values are:
•
•
•
•
•
•
•
0—No change
1—Disabled
2—Enabled (no authentication required)
3—Enabled (authentication required)
SERIAL_CLI_SPEED specifies the CLI port speed. The possible values are :
0—No change
1—9,600 bps
2—19,200 bps
To Next Page
Loading...
