HP Integrated Lights-Out - Page 334

334 User Guide Integrated Lights-Out
Parameters Default Value or Setting Your Value
Ping Gateway on Startup No
iLO IP Address N/A (DHCP)
iLO Subnet Mask N/A (DHCP)
iLO Gateway IP Address N/A (DHCP)
iLO Subsystem Name iLOXXXXXXXXXXXX, where
the 12 Xs are the server
serial number (assigned at
the factory)
Domain Name N/A (DHCP)
DHCP Server N/A (DHCP)
Primary, Secondary, and
Tertiary DNS Server
N/A (DHCP)
Primary and Secondary
WINS Server
N/A (DHCP)
Static Routes #1, #2, #3 N/A for both the destination
and gateway address
(DHCP)
Blade server parameters
iLO Diagnostic Port
Configuration Parameters
Transceiver Speed
Autoselect
Yes
Speed N/A (autoselect)
Duplex N/A (autoselect)
IP Address 192.168.1.1
Subnet Mask 255.255.255.0
SNMP/Insight Manager
Settings
SNMP Alert Destination(s) No
Enable iLO SNMP Alerts No
Forward Insight Manager
Agent SNMP Alerts
No