HP Integrated Lights-Out

34 User Guide Integrated Lights-Out
The Enable Static IP Bay Configuration Settings checkbox, available on the
Network Settings tab (not shown), allows you to enable or disable Static IP Bay
Configuration. The new Enable Static IP Bay Configuration Settings option is
only available on blade servers. When Static IP Bay Configuration is enabled, all
fields except iLO Subsystem Name are disabled. Only Static IP Bay
Configuration or DHCP can be enabled at one time. Disabling both Static IP Bay
Configuration and DHCP signals iLO to use a user defined IP address. The
Enable Static IP Bay Configuration Settings option remains disabled if the
infrastructure does not support Static IP Bay Configuration.