Introduction 12
HP SUM
version
Delivered with Support and limitations
HP ProLiant Support Pack for Linux
8.40
HP Smart Update Firmware DVD 9.0
For ProLiant Workstation Blades:
HP Workstation Support Pack for
Windows for HP WS460c G6 Blade
HP Smart Update Firmware DVD 9.0
(offline only)
4.0.0.64
HP Integrity Support Pack for
Windows® on Itanium®-based systems
Support for Integrity Support Pack for
Windows® 7.00
No support for BL860c/BL870c/BL890c i2
Servers firmware deployment
No support to download the latest
components available from ftp.hp.com
through HP SUM GUI and command line
options
4.0.1
HP ProLiant Support Pack for Windows
8.50
HP ProLiant Support Pack for Linux
8.50
No support for BL860c/BL870c/BL890c i2
Servers firmware or HP Integrity Support
Pack
4.0.2
HP Smart Update Firmware DVD 9.10
No support for BL860c/BL870c/BL890c i2
Servers firmware or HP Integrity Support
Pack
4.1.0
HP ProLiant Support Pack for Windows
8.60
HP ProLiant Support Pack for Linux
8.60
No support for BL860c/BL870c/BL890c i2
Servers firmware or HP Integrity Support
Pack
Deployment from HP SUM
The following sections discuss deployment from HP SUM.
Executing HP SUM
HP SUM provides three modes of execution for users:
• GUI—For firmware and software deployments
• Express—For software deployments only (local host only)
• Scripted—For firmware and software deployments running silently
HP SUM enables you to deploy to both local and remote deployments. HP SUM can run in both standard
Windows® and Linux operating systems in online mode and in offline mode (available on HP Smart
Update Firmware DVD) through special boot environments based on Linux boot kernels as long as the
prerequisites are met.
Use the following table to determine the correct execution mode for the server use case.
To Next Page
Loading...
Need help?
General