5
Table of Contents
1. Introduction
Supported Network Protocols . . . . . . . . . . . . . . . . . . . 1-8
Supported Printers . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9
Related Documentation. . . . . . . . . . . . . . . . . . . . . . . . 1-9
2. Installing the Print Server
What You Need for Installation . . . . . . . . . . . . . . . . . 2-11
Step 1. Identify Your HP Jetdirect 615N/610N/600N
Internal Print Server . . . . . . . . . . . . . . . . . . . . . . 2-12
Step 2. (J4167A Only) If Necessary,
Set the Token Ring Data Rate Switch . . . . . . . . . 2-14
Step 3. Before Installing the Card,
Verify That Your Printer Works . . . . . . . . . . . . . 2-15
Step 4. Turn Off Your Printer and Insert the Card . . 2-16
Step 5. Verify That the HP Jetdirect Card
is Operating Properly. . . . . . . . . . . . . . . . . . . . . . 2-18
Step 6. Configure the Card with Network Parameters
Required for Your Network . . . . . . . . . . . . . . . . . 2-21
Step 7. Install the Printer On Your System
(If Not Already Installed) . . . . . . . . . . . . . . . . . . . 2-22
3. 10/100Base-TX Link Configuration
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-23
Link-Speed LEDs . . . . . . . . . . . . . . . . . . . . . . 3-24
Link Troubleshooting . . . . . . . . . . . . . . . . . . . 3-24
To Next Page
Loading...
Need help?
General
