HP Jetdirect 610N - Graphical Control Panel

A-32
ENWW
Graphical Control Panel
On graphical control panels, a numeric keypad and navigation
buttons are used to access HP Jetdirect EIO menu items. For a
description of menu items and options, see Table A.2
.
Table A.2 HP Jetdirect EIO Graphical Control Panel Menu (1 of 2)
Menu
Item
Options Description of settings
TCP/IP ENABLE ON: Enable the TCP/IP protocol
OFF: Disable the TCP/IP protocol
CONFIG
METHOD
Specifies the method that TCP/IP parameters will
be configured on the Jetdirect print server.
BOOTP: Use BootP (Bootstrap Protocol) for
automatic configuration from a BootP server.
DHCP: Use DHCP (Dynamic Host Configuration
Protocol) for automatic configuration from a DHCP
server.
MANUAL: Use the Manual Settings option to
configure TCP/IP parameters
MANUAL
SETTINGS
Configure parameters directly from the printer
control panel:
IP ADDRESS n.n.n.n: The unique IP address of the
printer, where n is a value from 0 to 255.
SUBNET MASK m.m.m.m: The subnet mask for
the printer, where m is a value from 0 to 255.
SYSLOG SERVER n.n.n.n: The IP address of the
syslog server used to receive and log syslog
messages.
DEFAULT GATEWAY n.n.n.n: The IP address of
the gateway or router used for communications
with other networks.
IDLE TIMEOUT: The time period, in seconds, after
which an idle TCP print data connection is closed
(default is 270 seconds, 0 disables the timeout).