3-24 10/100Base-TX Link Configuration
ENWW
Link-Speed LEDs
The HP J6057A/J4169A print server provides 2 light-emitting
diodes (LEDs) near the RJ-45 connector. These LEDs indicate the
operating link speed of the print server.
Link Troubleshooting
If the HP J6057A/J4169A print server does not successfully connect
to the network:
● both link speed LEDs (10 and 100) will be off
● a “LOSS OF CARRIER ERROR” will be indicated on the Jetdirect
Configuration Page.
Note The HP J6057A/J4169A 10/100Base-TX print
server may require up to 10 seconds to establish a
connection on the network.
LED State Description
Off Not linked
On Link established
at either 10
Mbps or 100
Mbps
LEDs
To Next Page
Loading...
