hp fax 1020 series
Q-4
Loading documents to fax or copy
You can load up to 20 pages in the document feeder. Load the documents
face down (printed side toward the machine).
Sending a fax
You can send a fax in one of two ways:
• The standard method scans and sends each page.
•The Scan & Fax button scans all of the pages before starting to send.
This is very useful for multiple page faxes so that you can ensure all the
pages are scanned properly before dialing.
Standard faxing
1 Place the document (up to 20 pages) to be sent face down in the
document tray.
2Dial the number by using one of these methods:
• Entering the number and pressing Start/Copy.
•Pressing a One Touch button.
•Pressing the Speed Dial button, entering a speed dial code and
pressing Start/Copy. See “Using Speed Dialing and Broadcasting”
on page 17.
Note:
One touch buttons and speed dial codes must have been
previously programmed.
Adjust guides to
document width.
To Next Page
Loading...
Need help?
General
