72 Creating WDS links
6. Select Wireless > WDS.
7. U n d e r WDS link 1, configure the following settings:
• If not already selected, set Remote address to the MAC address of M210 #2.
• Set Encryption to WPA (PSK).
• Set the Link name to M210_WDS1.
• Set Key to a39xm210.
8. Select Save.
C. Setup the WDS link on M210 #2
Configuration settings on M210 #2 are similar to those defined on M210 #1.
9. Open the management tool on M210 #2.
10. Select Wireless > Radio.
11. I n t h e Basic settings area, configure the following:
• Set Mode to 5 GHz IEEE 802.11n.
• Set Channel to 36.
12. Select Save.
To Next Page
Loading...
