Sample WDS deployment 73
13. Select Wireless > WDS.
14 . U n d e r WDS Link 1, configure the following settings:
• Set Remote address to the MAC address of M210 #2.
• Set Encryption to WPA (PSK).
• Set Link name to the same value you entered for the first M210 (M210_WDS1).
• Set Key to a39xm210.
15. Select Save.
D.Test the link and make performance adjustments
The WDS link should now be active.
16. Select Tools > Ping on M210 #1 and ping the address of M210 #2 (192.168.5.20). If the
ping succeeds, it means that the WDS link is working.
17. To view the operational status and traffic statistics for the WDS interface on either M210,
select Status > Ports.
To Next Page
Loading...
Need help?
General
