HP ML330 - ProLiant - G3 User Manual

Regulatory Compliance Notices
Laser Product Label
The following label or equivalent is located on the surface of the HP supplied laser
device.
This label indicates that the product is
classified as a CLASS 1 LASER PRODUCT.
This label appears on a laser device installed
in the product.
Laser Information
Laser Type Semiconductor GaAIAs
Wave Length 780 nm +/- 35 nm
Divergence Angle 53.5 degrees +/- 0.5 degrees
Output Power Less than 0.2 mW or 10,869 W·m-2 sr-1
Polarization Circular 0.25
Numerical Aperture 0.45 inches +/- 0.04 inches
HP ProLiant ML330 Generation 3 Server Setup and Installation Guide A-7
HP CONFIDENTIAL
Writer: Rob Weaver File Name: h-appa Regulatory Compliance Notices.doc
Codename: Flashback Part Number: 322383-001 Last Saved On: 2/11/03 1:30 PM

HP ML330 - ProLiant - G3 Specifications

General

Product Line	ProLiant
Model	ML330 G3
Form Factor	Tower
Processor	Intel Xeon
Processor Cores	1
Memory Type	PC2100 DDR SDRAM
Hard Drive Interface	Ultra320 SCSI
RAID Levels	0, 1
Network	Integrated Gigabit Ethernet
Expansion Slots	6
Operating System Support	Windows, Linux
Drive Bays	6