Server Operations
Removing the Access Panel
WARNING: To reduce the risk of injury from hot surfaces, allow the drives and
the internal system components to cool before touching them.
CAUTION: Do not operate the server for long periods without the access panel.
Operating the server without the access panel results in improper airflow and
improper cooling that can lead to thermal damage.
NOTE: The interior of the access panel contains labels with information about the server
system board.
To remove the access panel:
1. Power down the server. Refer to “Powering Down the Server” in this chapter.
2. Remove the front bezel. Refer to “Removing the Front Bezel” in this chapter.
HP ProLiant ML330 Generation 3 Server Setup and Installation Guide 2-3
HP CONFIDENTIAL
Writer: Rob Weaver File Name: c-ch2 Server Operations.doc
Codename: Flashback Part Number: 322383-001 Last Saved On: 2/11/03 1:21 PM
To Next Page
Loading...
