Server Specific Troubleshooting
c. The monitor displays messages regarding server initialization in the
following sequence:
Video initialization—The initialization screen is displayed.
Processor initialization
Memory test
Memory initialization
Diskette drive
SCSI devices (if applicable)
ATA devices (if applicable)
Option ROM
d. The operating system loads to complete the boot process.
If the problem persists, continue with the section, “Diagnostic Steps,” in this
appendix.
HP ProLiant ML330 Generation 3 Server Setup and Installation Guide D-3
HP CONFIDENTIAL
Writer: Rob Weaver File Name: k-appd Server Specific Troubleshooting.doc
Codename: Flashback Part Number: 322383-001 Last Saved On: 2/11/03 1:35 PM
To Next Page
Loading...
