Hardware Options Installation
HP ProLiant ML330 Generation 3 Server Setup and Installation Guide 4-29
HP CONFIDENTIAL
Writer: Rob Weaver File Name: e-ch4 Hardware Options Installation.doc
Codename: Flashback Part Number: 322383-001 Last Saved On: 2/11/03 1:24 PM
5. Install the expansion board:
a. Insert the expansion board into the slot.
b. Secure the board with a screw.
6. Connect any cables to the expansion board.
7. For a full-length expansion board, install the expansion board retainer. Reverse
the actions in step 4.
8. Install the access panel and front bezel. Refer to Chapter 2, “Server Operations.”
To remove an expansion board, reverse the installation procedure.
To Next Page
Loading...
