User’s Guide 21
Setting Up
Computer with DVI port
The connections are similiar to the VGA computer connection. For a visual aid, see
the previous image.
1. Connect an M1-to-DVI/USB cable (available from HP) between the M1 port on
the projector
1 and the DVI port on the computer 2.
2. (Optional) To allow the remote control to function as the computer mouse,
connect the USB plug of the M1-to-DVI/USB cable into the USB port on the
computer
3.
3. (Optional) To get audio, connect the mini-phone audio cable between the audio
port on the projector
4 and the computer 5.
To Next Page
Loading...
