34 User’s Guide
Giving Presentations
To change the source
To change the source, either:
■ Press the source button on the projector or remote control.
■ Open the on-screen menu, select Input, and select the port to which the input
source is connected.
To hide or show the display
You can hide the display from your audience temporarily.
■ Press the hide button on the remote control.
■ Open the on-screen menu and select Quick choice > Hide.
The screen remains blank until you press the hide button again or any other button on
the projector or remote control.
✎
If you are using Microsoft PowerPoint, you can also press the B key or the W key to
hide the display. The screen remains blank until you press the B key or the W key
again.
To Next Page
Loading...
