User’s Guide 47
4
Maintaining the Projector
This chapter explains how to maintain the projector.
■ “Performing Routine Maintenance” on page 47
■ “Upgrading the Projector” on page 51
Performing Routine Maintenance
This section provides instructions on performing routing maintenance.
■ “To get the projector status” on page 47
■ “To clean the projector lens” on page 47
■ “To replace the lamp module” on page 48
■ “To replace the battery in the remote control” on page 50
To get the projector status
■ Open the on-screen menu and select Help > About this projector. This screen
shows information and status for the projector.
To clean the projector lens
■ To minimize the risk of damaging or scratching the lens surface, blow dust
particles off the lens with clean, dry, deionized air.
If this method does not work, use the following method:
■ Wipe the lens in a single direction with a clean, dry cloth. Do not wipe back and
forth across the lens.
If the cloth is dirty or smears the lens, wash the cloth. If the cloth is still dirty after
washing it or the fabric is damaged, replace it.
To Next Page
Loading...
