26 User’s Guide
Setting Up
SCART connection
Several types of video devices provide a SCART video connection.
1. Connect an M1-to-SCART adapter cable (available from HP) to the M1 port on
the projector
1, then connect a SCART cable from the adapter to the SCART
device
2.
2. (Optional) To get audio, connect the mini-phone audio cable between the audio
port on the projector
3 and the video device 4. If the video device has RCA
audio connectors, use a mini-phone to RCA adapter or cable.
✎
The SCART connector on the HP adapter cable contains a switch. If the picture does
not seem clear with the switch set to one, set it to two.
To Next Page
Loading...
