23
****************************************************************************
* *
* HP MSR931 BootWare, Version 1.01 *
* *
****************************************************************************
Copyright (c) 2010-2012 Hewlett-Packard Development Company, L.P.
Compiled Date : Sep 3 2012
CPU Type : P1016
CPU L1 Cache : 32KB
CPU L2 Cache : 256KB
CPU Clock Speed : 533MHz
Memory Type : DDR3 SDRAM
Memory Size : 256MB
Memory Speed : 667MHz
BootWare Size : 1024KB
Flash Size : 128MB
CPLD Version : 131.0
PCB Version : 3.0
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Starting to get the main application file--flash:/mainmsr93x.bin!...........
............................................................................
The main application file is self-decompressing.............................
............................................................................
........................Done!
System application is starting..................................................
User interface aux0 is available.
Press ENTER to get started.
Press Enter and the system displays the following prompt:
<HP>
This prompt indicates that the router has entered user view and is ready to configure.
Power-on check
After powering on the router, check the following items:
•
The LEDs on the front panel are normal, as described in "LED description."
•
The console terminal displays information correctly. You can see the startup window on the local
console terminal. For more information, see "Startup process."
•
After completing the POST, the system prompts you to press Enter. When the command line
prompt appears, the router is ready to configure.
To Next Page
Loading...
Need help?
General
