12. If it is necessary to replace the webcam/microphone module or microphone module:
CAUTION: Handle the webcam/microphone module or microphone module with caution.
These modules have a thin profile and are susceptible to damage when not handled carefully.
a. Lift the module (1) from the display back cover. (The module is attached to the display back
cover with double-sided adhesive.)
b. Detach the cable (2) from the module.
c. Remove the module.
13. If it is necessary to replace the display hinges:
a. Remove the six Phillips screws (1) that secure the display hinges to the display panel.
b. Remove the two Torx screws (2) on the left hinge.
62 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
To Next Page
Loading...
