HP MX50 - Page 18

14
HP Pavilion MX50, MX70, and MX90 Multimedia Monitors
Filename: S01MXCUS.doc Title: HP-Print2k.dot
Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc.
Revision #: 6 Page: 14 of 40 Printed: 12/15/00 02:51 PM
If you select the icons for
Brightness
,
Contrast
, or
Zoom
, an adjustment bar appears
below the OSD window. You shorten or lengthen
the adjustment bar with the Plus (+) or Minus (–)
button. A number next to the control bar shows
the percentage of the current setting relative to its
maximum value.
To use the OSD Main window:
1
Press the Select button on the front of the
monitor to open the OSD Main window.
2
Press the Plus (+) or Minus (–) button to move
among the icons in the window.
3
When the icon for the function you want is
highlighted, press the Select button.
3
If you select the
Degauss
or
Exit
option,
the option takes effect immediately.
3
If you select the icons for
Brightness
,
Contrast
, or
Zoom
, an adjustment bar
appears.
3
If you select any other option, another
window appears.
4
If an adjustment bar appears, press the Plus (+)
or Minus (–) button to change the current
setting, and then press the Select button to
save your changes and close the
adjustment bar.
82
5
To close the OSD Main window,
select the
Exit
icon.
Note:
Only a highlighted icon, and the Reset
and Exit icons, will display a descriptive text.
EXIT