Removal and Replacement Procedures
Maintenance and Service Guide 5–69
1. Prepare the computer for disassembly (Section 5.3),
and then remove the following components:
a. Hard drive (Section 5.4)
b. Bluetooth board (Section 5.6)
c. MultiBay II device (Section 5.9)
d. Keyboard (Section 5.10)
e. Switch cover (Section 5.15)
f. Fan assembly (Section 5.17)
g. Heat sink (Section 5.18)
h. Display assembly (Section 5.20)
i. Top cover (Section 5.21)
j. PC Card/digital media board (Section 5.22)
k. Speaker (Section 5.23)
l. Microphone (Section 5.24)
To Next Page
Loading...
