Operating altitude 0 m to 5,000 m 0 to 16,400 ft
Storage altitude 0 m to 12,192 m 0 to 40,000 ft
Power source 100 V ac to 240 V ac 50/60 Hz
Measured power consumption
Full power 700 W (2 sec)
Typical settings 420 W
Sleep <0.5 W
O <0.5 W
Input terminal One audio line-out, one S/PDIF port, one DisplayPort connector, three HDMI
ports, one RJ-45 port, two USB ports, and two USB power charging ports
Optional remote control
Processor NVIDIA® Tegra® X1 processor
RAM 3 GB
Storage 16 GB, adaptable storage over USB Type-A ports
Video 4K HDR supported
Audio High-resolution audio playback up to 24-bit/192 KHz
Connectivity Gigabit LAN, USB-A 3.0 × 2, Wi-Fi 802.11 AC dual band, 2 × 2 MIMO, Bluetooth
4.1 LE
IMPORTANT: The DisplayPort 144 Hz refresh rate for 4K mode applies only when the OSD OverClock
function is turned on. To turn on the OverClock function, open the OSD menu, select Picture, select Gaming,
and set OverClock to On. The default setting is O, which limits the refresh rate to 120 Hz.
Preset display resolutions
The display resolutions listed below are the most commonly used modes and are set as defaults. This monitor
automatically recognizes these preset modes and they will appear properly sized and centered on the screen.
HDMI display resolutions
Display Mode Horz freq (kHz) Vert freq (Hz)
VESA 640 × 480 31.47 60
VESA 800 × 600 37.88 60
VESA 1024 × 768 48.36 60
640 × 480p 31.48 60
720 × 480p 31.5 60
720 × 576p 31.25 50
1280 × 720p @ 50 37.5 50
1280 × 720p @ 60 45 60
20 Appendix A Technical specications
To Next Page
Loading...
